Delta T Systems offers leading edge performance and a full range of energy-efficient portable chiller systems. Unique variable speed technology and high precision temperature control (within 0.5°F ) make these portable chillers excellent performers in a wide variety of temperature control applications.
- Standard portable chiller units available from 1 – 30 tons and custom solutions above 60 tons
- Packaged chillers available for 40, 50 and 60 tons and modular chillers above 60 tons
- Air and water cooled chiller systems
- Temperature range from -10°F (-23°C) to 100°F (38°C)
- Temperature control to within 0.5°F
- Effective operation between 10% and 100% of rated capacity for all variable speed chiller units
Refrigeration Features
- Hermetically sealed variable speed compressor technology
- Energy savings between 30% and 50% of the initial investment
- Soft start
- Less wear and tear compared to compressor cycling
- Inverter drive protects compressor from power spikes
- Tight temperature control within ½ a degree
- Can overspeed compressor to obtain higher capacities
- Scroll compressors on the 40 to 60 ton models
- Stainless steel, copper brazed plate evaporator
- Non-ferrous – will not rust
- Less chance of fouling due to its inherent small channels producing high velocities keeping the channels clear.
- Variable speed condenser fan
- Operates at the most efficient point
- Lowers noise since it runs at the minimum speed required
- Electronic expansion valve
- Fine tunes the amount of refrigerant needed to maintain the system at the most efficient operating point
- Allows for a larger operating temperature range without sacrificing temperature control or adding expensive refrigeration controls
- Microchannel aluminum condenser coils (All air cooled models)
- Less refrigerant required due to smaller refrigerant tubes
- Eliminates galvanic corrosion as seen with copper tube and aluminum fin designs
- Coaxial condensers (2 to 10 ton water cooled models)
- Cleanable shell and tube condensers (20 to 60 ton water cooled models)
Water Features
- Non-ferrous chilled water piping
- Evaporator inlet strainer
- Easy access and serviceability for cleaning or removal
- Larger filter area vs. a typical y-strainer equates to less time between cleanings
- Standard operating range from -10°F (-23°C) to 100°F (38°C)
- Tight temperature control to within 0.5°F
- Automatic bypass in low/no flow scenarios to protect unit
Sensor Features
- Refrigerant suction and discharge pressure transducers
- Allows the compressor to adjust its speed to adapt to the best efficient and safe condition to reduce down time
- Actual pressure information is displayed and captured to reduce the time to troubleshoot
- Eliminates fragile copper capillary tubes
- Refrigerant suction and liquid line temperatures sensors for superheat and subcool readings
- Compressor discharge temperature sensor for compressor protection
- Chilled water in and out pressure and temperature sensors
- Tank level sensor
Cabinet Features
- Fits through a standard 36 inch doorway (needs to be 34-1/2 inches or less to meet this due to door stops)
- Small footprint (34×34 on 5 and 7.5 ton, 34×46 on 10 and 15 ton)
- Can fit in standard shipping container – tallest chiller (15 ton) is 85 inches
- Full access on all sides with lift off panels
- Separate air section so chiller can be serviced by removing panel without creating faults
- Round coil allows for locating chiller up against a wall
Electrical Features
- NEMA 12 electrical panel
- Disconnect switch
- 24 V controls
- Finger safe electrical components
- Phase monitor
- 4 inch touch screen display
- State of the art controls
- Flexible remote communication options
- Extensive digital data collection
- Adaptive control to reduce downtime
Control Features
- Proprietary Control Platform from the leader in the HVAC and refrigeration industry
- Integrated Ethernet interfaces offer a wide range of open protocols (Web server, Modbus/TCP, BACNet, FTP, DHCP, DNS, NTP) (optional)
- Cloud services (optional)
- 4 Inch Touch Screen Display
- Adaptive Control
- Uses the systems pressures, temperatures, and compressor drive information to operate the chiller at the most efficient operating point while maintaining the predefined compressor operating envelope limits
- Changes the speed of the compressor should any of the parameters approach a fault condition in order to reduce customer downtime.
- Data Logging
- Logs temperature and pressure data continually for historical reference
- Captures data at the time of an alarm event
- Remote Monitoring (optional)
Bonus Features
- Dewpoint sensing and setpoint tracking
- 50 Hz applications without a cooling capacity derate
- Modbus RTU or BACnet MS/TP RS485 communication
- Remote start/stop
- Cooling enabled output
- Automatic water bypass
- Flow indication
- Dirty strainer indication
- Tank level indication
- Low and high level indication
Options
- Remote display
- Overhead piping kit
- Mounting feet in lieu of casters
- No pump, no tank
- Pump, no tank
- Ship loose pump, no tank
- Auto water make-up
- 50 micron side stream filter (factory installed)
- 50 micron full flow filter (factory installed)
- Alarm horn
- Alarm strobe
- Remote alarm contacts
- Remote access to control
- UL 508a
- SNMP, Modbus TCP/IP, BACnet Ethernet Communication
- Outdoor / outdoor coastal
- Dust air filters
- Anti-drain back design
- Supply and return valves
- Pump VFDs
- Medium and high pressure fans for ducted applications
Portable Chiller Features:
- Proprietary Control Platform from the leader in the HVAC and refrigeration industry
- Integrated Ethernet interfaces offer a wide range of open protocols
- Cloud services (optional)
- 4 Inch Touch Screen Display
- Adaptive Control
- Operational efficiency optimization algorithm
- Data Logging
- Continual temperature and pressure data logging
- Alarm event data logging
- Remote Monitoring (optional)
Delta T Systems has been engineering state-of-the-art, portable air and water cooled process chillers for a large variety of commercial applications for nearly two decades. Our chillers serve many sectors including industrial manufacturing, food and beverage processing, medical and pharmaceutical products.