June 24th 2016 – Delta T Systems expands its capabilities into the rubber processing industry.

Delta T Systems’ temperature control units can be used in various industrial processes where heating and cooling is needed. Particularly in rubber processing applications, precise temperature control is needed.

Rubber can be processed by compression, transfer, and injection molding; however, rubber injection molding is the most efficient and cost effective method. It is the best choice for high-volume production runs of small size products that require tight tolerances and little to no finishing.

Rubber injection molding involves feeding material or compounds into a press, which is then warmed and injected into a mold. Rubber compounds are used in many products like tires, profiles, gaskets, and seals. Typically products are molded, but sometimes they are also rolled or extruded.


rubber injection molding process newsThe rubber injection molding process is the most precise compared to compression and transfer molding; because the injection process controls the pressure, temperature, and speed at which the material enters the mold. While injection molding costs more than compression and transfer molding due to higher tooling costs and longer initial setup times, it is still considered a cost-effective molding process.

Delta T Systems’ temperature control equipment is designed and tested for various rubber molding applications that require temperatures ranging from 20°F to 650°F. With precise and consistent temperature control, a rubber manufacturer can produce higher quality and a higher quantity of parts every time with reduced waste.

No job is too big or too small. If you don’t see what you are looking for, just ask! Delta T Systems prides itself on custom applications and superior technical support.

Request a Quote Click to Call Us