 |
|
|
|
|
Our oil temperature controller is equipped with a microprocessor-based PID controller. This Compact Series oil heating unit has 6 KW Heating Capacity and also features a 1.5 sq. ft. Heat Exchanger for cooling.
This Oil Temperature Control Unit meets NEMA 1 electrical specifications and conforms to NEC electrical code.
Standard Features
- Microprocessor-Based PID Controller
- Over Temperature Protection
- Fused Motor Protection
- Fused Heater Protection
- Fused Transformer Protection on both Primary & Secondary Sides
- NEMA 1 Electrical Specifications & Wiring in Conformance with NEC
- Grounded Control Circuit
- 3/4" NPT Delivery and Return Pipe Connections
- Low Watt Density Heater Element
- Ful-Flo Valve to Insure Proper System Flow and Velocity
- Delivery Pressure Gauge
- Pilot Lights to indicate Separate Functions of Use
- Automatic cooling using shell & tube heat exchanger
Optional Features
- UL 508A Certified Electrical Panel - Enclosed types
- NFPA 79 electrical safety standards
- NEMA Classifications: 3, 4, 4X, 7 and 12 rated enclosures
- Drain Valve
- Manual By-Pass
- Mercury or Solid State Heating Contactor
- Controller Connector to any Standard Protocol (i.e. Modbus, Profibus, etc.)
- Audible or Visual Alarms
- 50 and 60 Hz
- 208–600V
Please consult us if other options are desired.
